Private IP Address Default IP Setup

When installing your Linksys router, you should always write your diary data from router configuration settings. This is a must. You may need the information in the future. The password is very critical. If you have forgotten your password, you can be prohibited from using your own router.

Each modem is preset. If the router’s IP address (usually 192.168.1.1 in modem function) in the browser address type Bar in a log box appears. They are password and login name, you will need to think about looking. Most routers you just leave the login and password is admin default empty. Well, if someone is able to access the Internet via the router, because it is not encrypted, you can change access control panel and the things on the router, such as passwords and logins. Once someone does this everyone is connected to the wireless router, will be launched immediately and requested re-connect encryption key. The only way to fix this is by pressing the reset button on the router, such as the instructions ask you.

Turn on and out of them all devices, namely, computer, modem and router by Netgear switch. Wait until all devices start correctly. Check that all the lights on relevant modem and router switched on. Check the hardware configuration, when light on the modem or router has trouble lighting. A connection to the wireless network and verify that you are unable to browse the Internet.

Fortunately, wireless specifications include error correction procedures, but the error correction procedure reduces throughput. Users can not see packet collisions and lost packets reports; they see it as a slowdown in their network.

Once you have changed the network configuration in your DD-WRT modded router, disconnect the router and then reconnect it to so you just have your new IP address. Your new IP address must be somewhere in the 10.0.1.0 network. Now, open a Web browser in the direction of 10.0.1.1, which is now the default gateway to the router WRT54GS DD-WRT modded.

To disable SSID broadcast from the web interface for you to disable wireless router security and SSID broadcast to go and apply. The router will restart.

Please note that this is not firmly guaranteed to keep people on your network. These steps are only a deterrent and can be bypassed if the intruder wants to bad enough. If you have reached this point, I need to make something clear. Encryption you use, you will not only defend. These steps do not, if you have a key defined as “MyNetwork” or WEP for your safety. Use the best security (WPA-AES) and at least one key of 20 characters with numbers and upper / lower case. There should be no words in there that can be found in the dictionary. That being said, let’s move on to deterrents.

A simple way to share the Internet connection with Linux uses IP transmission function of the core translation network address (NAT). Can use ipchains or iptables NATing. It is believed that the private network in the area 192.168.1.0-255.

If something really wrong when editing your system device via 192.168.1.1, there is usually a reset switch on the back of the device that could repair to the factory settings most configurations.